4 Stage Reverse Osmosis Drinking Water Filter System + Permeate Pump 100 GPD

  

Supreme quality - designed, engineered, and assembled in USA to guarantee water safety & your health. Premium long-lasting filters used to treat tap water, well water.

Provide unlimited clean, refreshing crisp tasting water superior to bottled water. Reverse Osmosis Water Filtration Unit with Permeate Pump producing up to 100 Gallons of pure filtered water per day (under lab conditions). These pumps dramatically improve the efficiency of R. Water production, reducing wastewater by up to 80%. Permeate Pumps can also bring storage tanks up to line pressure and then shut the system down when these tanks reach capacity, eliminating the need for a hydraulic shut-off valve.

1st Stage 5 Micron Sediment Filter 2.75"x9.75" Sediment filter to trap particles, including rust and calcium carbonate. 2nd Stage 5 Micron Carbon Block Filter 2.75"x9.75" Carbon filters are most effective at removing chlorine, sediment, and volatile organic compounds (VOCs) from water. 3rd Stage Reverse Osmosis Membrane 75 GPD TYPICAL REJECTION CHARACTERISTICS OF R. 4th Stage Inline 2" x 10" Carbon Post Filter For taste & Odor regulation.

THIS UNIT COMES WITH A PERMEATE PUMP Aquatec. FEATURES AND BENEFITS OF PERMEATE PUMP. Requires no electricity, powered by energy The original Permeate Pump is a simple, yet revolutionary, device.

Powered only by the hydraulic energy of brine water usually lost to the drain i. No electricity required, the Permeate Pump forces product water into the storage tank, reducing membrane back pressure and maximizing available feed pressure.

Water production, reducing waste water by up to 80%. Water production, superior water quality, and extended filter/membrane life. Improves recovery rates by as much as 400%.

Reduces waste water by as much as 80%. Effective for inlet water pressure as low as 30 psi. Increases membrane life, lowers "TDS creep". Fills product tank up to 4 times more rapidly.