6 Pack 600GPD RO Membrane Maple Syrup Reverse Osmosis System Water Filter 12x3

  
Membrane Solutions Reverse Osmosis (RO) membranes are made from 100% food-grade Thin Film Composite (TFC) material for ultimate purification performance, with high permeate flow and salt rejection, tested by an independent third-party to meet NSF/ANSI 58 water standards to ensure a reduction in contaminants, providing safe-clean drinking water. Membrane Solutions RO membrane with a high 97% stabilized salt rejection rate. Hundreds of impurities are reduced by over 99% through the 0.0001-micron TFC membrane layer, including heavy metals (fluoride, calcium, magnesium, lead, colloids, chromium, and nitrates), organic materials, and harmful minerals, including other soluble salts found in water resources. With the industry-standard 12" x 3" size, this high capacity RO element fits most standard 2812/3012 RO housing for the light commercial reverse osmosis water systems.

Membrane Solutions ROULP-2812-200, ROULP-3012-300, ROULP-3012-400, ROULP-3012-500. The list is under continuous updating.

This product is a generic item that is designed to replace the original part. Any brand names or logos are the registered trademarks of their respective owners. Any use of any brand name or model designation for this product is made solely for purposes of demonstrating compatibility. Filter Size: 12" x 3" (Fitting Standard 3 ID Membrane Housings).

Capacity: 600 GPD (Gallons per Day). The membrane element has a life expectancy between 2 to 3 years, based on average feedwater quality, temperature, and incoming water pressure.

Assistance is available from our experts, ready to answer any of your questions about your RO membrane. Have a concern or question? Welcome to the Membrane Solutions family.

1 Pack: 1 x 600 GPD RO Membrane. 2 Pack: 2 x 600 GPD RO Membrane. 3 Pack: 3 x 600 GPD RO Membrane.

4 Pack: 4 x 600 GPD RO Membrane. 6 Pack: 6 x 600 GPD RO Membrane. It is recommended that systems using these elements rinse the elements for 24 hours, prior to first use, to meet NSF/ANSI 58 Standard. The first full tank of permeate must be discarded.

Do not use this initial permeate for drinking water or food preparation. Keep elements moist at all times after initial wetting. To prevent biological growth during prolonged system shutdowns, it is recommended that membrane elements be immersed in a preservative solution. Rinse out the preservative before use.

The membrane shows some resistance to short-term attack by chlorine (hypochlorite). Continuous exposure, however, may damage the membrane and should be avoided. Recommend work pressure is 100 psi when using this product in a Maple Syrup reverse osmosis system. And we suggest heating and maintaining the raw sap at 104°F(40°C) to prevent clog on the membrane while keeping it under 113°F(45°C) to avoid damage to the membrane due to over-high temperature.