Reverse Osmosis Water

Reverse Osmosis RO 100 GPD Booster Pump ShutOff Switch

Reverse Osmosis RO 100 GPD Booster Pump ShutOff Switch
Reverse Osmosis RO 100 GPD Booster Pump ShutOff Switch
Reverse Osmosis RO 100 GPD Booster Pump ShutOff Switch

Reverse Osmosis RO 100 GPD Booster Pump ShutOff Switch  Reverse Osmosis RO 100 GPD Booster Pump ShutOff Switch
Reverse Osmosis 100 GPD Diaphragm Booster Pump. DC 24 V Transformer + 2 Pcs Connect Fittings (1/4 inch tube x 3/8 inch Threaded) + High pressure shut off valve + 1/4 inch Tube OD quick fit Solenoid valve. For those who they have low incoming city water pressure less than 50 PSI or well water tank pressure 40 - 60 PSI. This pump will not increase the production volume or the pressure for those who they are on city water pressure 55 PSI and up. Reverse osmosis systems will increase your system input pressure then will increase the water production & purity as well if your city water pressure is lower than 50 PSI. Connect the pressure gauge to your RO system between the third and fourth stage before or after the auto shut off valve. This will help to measure the PSI on your system. Any drop in pressure means that the filters are clogged with dirt.

When the filters are new, the PSI should be between 55 to 85 PSI and any drop in pressure after a few months indicates that it's time to change the filters. Increases your membrane performance if your municipality water pressure (PSI) rated low.

Using Booster pump for Reverse osmosis systems will increase your system input pressure then will increase the water production & purity as well. HIGH QUALITY, SILENT, DUTY CAYCLE.

High pressure switch for reverse osmosis booster pump (on - off) operation control. High pressure switch job is to turn off the booster pump when the tank is full. The pump will automatically control all residential reverse osmosis systems. The pump turns on to produce water into the pressure tank, and then turns off when the pressure tank is full.

This pump are able to work at least 3 months continuously without stop. This 100 GPD booster pump is designed for membranes rated 85 to and100 GPD. It can be mounted in several positions. Safe power operation with, low energy (low voltage - 24 volt). The motor of these boosters is Duty cycle will vary with load and ambient temperature; smoother running; longer life; and work with high efficiency, never Mind if its installed in warm, humid, hostile environment where other pumps can't operate in such hard environments.

Product total weight with transformer 6 Lbs - Booster dimensions 6.5 inch X 4 inch X 4 inch. All required fittings & instruction manuals are included to DIY your own installation. AMPS: 0.7 / 0.9 Max.

Working pressure: +/- 81 PSI. This pump is to be used with reverse osmosis systems 85 & 100 GPD only. Output Volts :24 Volt DC.

This item is in the category "Home & Garden\Kitchen, Dining & Bar\Small Kitchen Appliances\Water Purification\Water Filters".usa" and is located in this country: US.

This item can be shipped worldwide.

  • Model: 105014~105108~105568~105597~A
  • Color: Black
  • MPN: 105712
  • Brand: Max Water
  • Compatible Model: Max Water
  • UPC: 700256128519


Reverse Osmosis RO 100 GPD Booster Pump ShutOff Switch  Reverse Osmosis RO 100 GPD Booster Pump ShutOff Switch