Reverse Osmosis Water

Reverse Osmosis RO 200 300 GPD Booster Pump + Transformer

Reverse Osmosis RO 200 300 GPD Booster Pump + Transformer

Reverse Osmosis RO 200 300 GPD Booster Pump + Transformer  Reverse Osmosis RO 200 300 GPD Booster Pump + Transformer

Reverse Osmosis 200-300 Gpd Diaphragm Booster Pump. DC 24 V Transformer + 2 Pc's Connect Fittings (1/4 inch tube x 3/8 inch Threaded). For those who they have low incoming city water pressure less than 50 PSI or well water tank pressure 40 - 60 PSI. This pump will not increase the production volume or the pressure for those who they are on city water pressure 55 PSI and up. Reverse osmosis systems will increase your system input pressure then will increase the water production & purity as well if your city water pressure is lower than 50 PSI.

Increases your membrane performance if your municipality water pressure (PSI) rated low. Using Booster pump for Reverse osmosis systems will increase your system input pressure then will increase the water production & purity as well. High pressure switch for reverse osmosis booster pump (on - off) operation control. High pressure switch job is to turn off the booster pump when the tank is full. Note: The high pressure switch is not included with this package. The pump will automatically control all residential reverse osmosis systems.

The pump turns on to produce water into the pressure tank, and then turns off when the pressure tank is full wehn High pressure switch is included in the system. This 200-300 GPD booster pump is designed for membranes rated 200-300 GPD.

It can be mounted in several positions. Safe power operation with, low energy (low voltage - 24 volt). The motor of these boosters is Duty cycle will vary with load and ambient temperature; smoother running; longer life; and work with high efficiencies never Mind if its installed in warm, humid, hostile environment where other pumps can't operate in such hard environments. Product total weight with transformer 6 Lbs - Booster dimensioned 6.5 inch X 4 inch X 4 inch. All required fittings & instruction manuals are included to DIY your own installation. Open Flow: 1.2 Lpm.

Working pressure: 82 +/- 8PSI. This pump is to be used with reverse osmosis systems 200- 300 gpd only.

Output Volts :24 Volt DC. This item is in the category "Home & Garden\Kitchen, Dining & Bar\Small Kitchen Appliances\Water Purification\Water Filters".usa" and is located in this country: US.

This item can be shipped worldwide.

  • Model: 105019
  • Type: Diaphragm Booster Pump
  • Compatible Model: Max Water
  • Color: Multicolor
  • MPN: 105019
  • Power: 120 V AC / 24 V DC
  • Brand: Max Water
  • UPC: 700256128557


Reverse Osmosis RO 200 300 GPD Booster Pump + Transformer  Reverse Osmosis RO 200 300 GPD Booster Pump + Transformer