HF5-600 Membrane (Installed into Stainless Steel Membrane Housing). 2 - 10 " x 4.5" Housings - Pre Assembled on wall mount bracket. 1 Inlet NPT for feed water connection. Auto Shut off Valve, Manual Flush Valve. Membrane Flush Valve: For easy clean and considerable extension of membrane life.
Flow Restrictor : Adjustable for 1:1 Ratio. Recommended to adjust flow flow restrictor to 2:1 Waste to Good Water Ratio for better water quality.
Recommended Feed Pressure 80 psi for better RO Water Production. Recovery (system ratio 1:1) 50%. Test Conditions: Permeate flow and salt rejection based on 250 ppm, 85 psi. 77F, pH 7, and 50% recovery. Note: Higher TDS and/or lower temperatures will reduce the system's production.
Membranes are tested at 85 PSI Water Pressure, 250 PPM and 77F Water Temperature. Lower Water Temperature, water pressure and higher TDS will reduce RO water production. Feed Water Port 1 FPT. Warning: If you have very hard water, Use pre-scale removal filter is recommended. (Hardness not to exceed 15 gpg).
Premature membrane fouling/scaling will occur if used with very hard water and very high PPM and above described water condition. Adjust your flow restrictor when initially setting up and prior to use. Used or installed items are not accepted for return.
This item is in the category "Home & Garden\Kitchen, Dining & Bar\Small Kitchen Appliances\Water Purification\Water Filters". The seller is "pacificwatersystems" and is located in this country: US.This item can be shipped to United States, Canada.